Sentence examples for settlement ratio of from inspiring English sources

Choose the right type of coverage depending on these points Before buying health insurance, study about the claim settlement ratio of different companies.

Using this method, the influence of embankment height, soft ground depth, soft ground elastic modulus, and geosynthetic tensile stiffness on efficiency, stress concentration ratio, settlement ratio, tension of geosynthetic, and axial strain of geosynthetic are investigated.

The variations of design limit parameters in the two modes of change to pier length and diameter including the applied load, top settlement, stiffness modulus and pier modulus, in terms of the slenderness ratio, make a linear function while the variations of load and settlement ratio show an exponential function.

For Ulothrix (length: 5 8 mm), the surface also showed the best antifouling performance, the reduction ratio of the settlement on the surface with grooves spaced 12 μm apart could even reach 92%.

Another study in two slums of Nairobi informal settlements estimated a maternal mortality ratio of 706 per 100,000 live births and a third of these were due to abortion complications [ 11].

Clough and O'Rourke (1990) found that the ratio of the maximum settlement induced by the construction of diaphragm walls to the depth of the trench was 0.15% according to in situ monitoring results.

The net change-to-persistence ratio of the cultivated and settlement areas was the highest, while that of bareland was the lowest (Table 3).

In most of the works the material needs to be compacted to decrease the void ratio of the aggregate and reduce future settlement.

Using a large ground settlement simulator and a fiber Bragg grating (FBG) strain sensor network system, a large-scale model test, with a similarity ratio of 1 2, was performed to analyze the influence of differential settlement between new and old subgrades on pavement structure under loading condition.

In general, a ground volume loss ratio of about 1 % will cause ground surface settlement.

Optimal parameters: Liquid ratio of 10%, extraction temperature 31.74°C, extraction ph 8.97, settlement ph 4.4, extraction time 33.24 min.