Sentence examples for setting reactive from inspiring English sources

This section calculate the power loss under different power output conditions by setting reactive power to be zero and changing the active power from -1.0 p.u. to 1.0 p.u. with step size of 0.1 pu.

Furthermore, the effects of NAC may introduce greater bias in residual tumor measurement relative to the preoperative setting: reactive inflammation, fibrosis or necrosis may be difficult to distinguish from residual tumor [ 13], and measurement errors may be additive when tumors regress as multiple, scattered deposits [ 2].

While, the traditional model always uses constant reactive power control modes by setting the reactive power reference.

If the message is "incomplete", then agent FCS2 follows the steps taken by agent FCS3 in step 1 to find the optimal reactive power output (Q_{text{setop2}}), sets the reactive power outputs of the sources under its control and sends the appropriate message.

Reference [5] shows that the AVC system sets the reactive power level according to the bus voltage and total reactive load of both dispatching center and plants.

Agent FCS3 sets the reactive power output of the sources its section, i.e., section 3, to (Q_{text{DG3max}}) or (Q_{text{DG3min}}) as appropriate and sends a message to agent FCS2 that the control task has not been completed.

If (Q_{text{DG3min}} < Q_{text{setop3}} < Q_{text{DG3max}}), then agent FCS3 sets the reactive power outputs of the sources in section 3 to (Q_{text{setop3}}) (if (Q_{text{set3}} = Q_{text{setop3}}), no action is taken) and sends a message to agent FCS2 that the control task has been completed.

The setting of reactive power control can be dependent on the PV production and the resulted voltage.

With the bounded-voltage design, the output voltage of the DC/AC converter always stays within the given range, which avoids the integrator windup caused by the saturation unit with the inappropriate setting of reactive power reference.

The screen itself is very clear and bright and acceptably readable in direct sunlight thanks to the reactive brightness setting.

In addition to the challenge of setting the threshold level, reactive approaches risk oscillating system state by reacting too frequently to varying node utilisation.