Sentence examples for sets of heating from inspiring English sources

The purification system consists of a rigid box air filter (MERV rating 14, 0.3 μm pores) followed by two sets of heating elements and a catalytic converter.

The mineral-rich pool has concentric bands of vibrant colours from red to green, due to different sets of heat-loving pigmented bacteria in each band.

Two sets of heat integration between the rectifying section and the stripping section of two adjacent columns are placed in the conventional three-column system.

For each Re and S/Dj tested, three sets of heat transfer data are acquired from each effused impinging surface at three eccentricities (E) between jet-center and dimple-center of 0, 1/4 and 1/2 dimple-pitch (H).

Three sets of heat transfer correlations for determining the boiling heat transfer coefficients over pool-boiling, intermittent and vapor regions of the evaporator along with two sets of empirical correlations that permit the evaluation of individual and interdependent Q and Rth,con effects on overall thermal resistances and evaporator pressures of the tested TPLT are generated.

Then, the ideal Rankine cycle is optimized for the two different working fluids and different sets of heat sources (all the available heat sources and the sources with high exergy respectively) throughout the engine operating range, reaching a maximum improvement of 15% of the fuel consumption of the engine.

Incorporating directly measured skin temperature values might have affected the differences in heat balance among individuals but it is unlikely that it would have eliminated the difference between the two sets of heat balance estimates.

There is no overlap among the four sets of heat balance estimates produced with the conventional method or among the four sets of estimates produced with the segmented method.

A second set of heating experiments is designed to approach burial conditions using a gold capsule.

All components in MPW were decomposed in N2 atmosphere over a set of heating rates (5, 10, 20 and 40 °C/min), temperatures of 30 700 °C and sample size range of 1 4 mm.

The comparatively exact setting of heating temperature and time in the furnace allowed the thermal transformation to be resolved as a sequence of neck formation between adjacent particles due to surface diffusion sintering, restructuring, and dissolution of particulate structure by viscous flow, and finally, melting.