Sentence examples for set the thickness of from inspiring English sources

Continuing from the previous example, set the thickness of all objects in frame "frm1" to 3.

In addition, it was reasonable to set the thickness of the high-density polyethylene (HDPE) coating in the range of 1 2 mm to obtain a large amount of molten urea-water solution without inhibiting the heat transfer.

When a relatively low termination voltage (i.e. 400 V) was set, the thickness of the coatings was in a range of 7 15 μm and the treatment time to reach the preset voltage was less than 5 min.

Given these assumptions, we set the thickness of the tuff at 250 m (domain 1), with an underlying 700-m-thick rock layer (domain 2; Fig. 9a).

The weights in the adjacency matrix or the T matrix produced by the inequality simplifier can be imported as edge attributes and used to set the thickness of the edges.

Choose the lining board material and set the thickness of the steel plate on the mill body by the price of the ball mill.

Dietrich and Rempe hope to drill at ridge tops to measure the thickness of weathered rock in order to test their model and confirm the key role played by drainage of fresh bedrock in setting the thickness of weathered bedrock across hilly and mountainous landscapes.

Setting the thickness of the rock at 1000 m and the average density at 2.0 g cm−3, and assuming that this region is localized to the vent area, the local density of this region will become ρ ∼ 0.4 g cm−3.

Setting the thickness of the rock at 1550 m and the average density at 2.0 g cm−3 and assuming that this density anomaly is localized to the vent area, we obtain a local density of this region of ρ ∼ 0.9 g cm−3.

The copings were manufactured by setting the thickness of the coping at 0.5 mm.

Facing into a structure, a gallery may either be set into the thickness of a wall at ground level or be elevated and supported on columns or corbels.