Your English writing platform
Discover LudwigExact(3)
After the bottom gap rate β is over 25%%, the vortex B completely disappears and the separation position III merges with the reattachment position II.
Several key parameters, such as separation position and momentum thickness, are calculated and compared for the rotation and non-rotation cases.
The experimental results showed that the rotation changed the separation position of impinging jet flow on the cylinder, and allowed the surface temperature of the cylinder to tend towards uniformity along the circumferential direction of the cylinder.
Similar(57)
Such cells often had identifiable metaphase plates with some chromosomes, that usually were in the process of separation, positioned close to the plate, as well as some fully separated sisters that were closer to the spindle poles (Fig. 4H and Fig. S1I are good examples).
The separation positions I and III move forward in the wind direction and the reattachment position II moves backward after vortex B is compressed by the accelerated flows.
The moving directions of the flow separation positions on the ground are consistent with the swinging directions of the inclined fences.
As K increases, the separation positions shift downstream, the wake becomes narrower and the amplitude of fluctuation of the instantaneous lift and drag coefficients decreases.
Compared with the impact of parameter H, the moving directions of separation positions I and III are consistent with the swinging directions of inclined fence while the reattachment position II is immobile (Eq. 2).
The results showed an influence of the freestream turbulence level on the separation point position.
In our case, the study of the separation point position coupled with the pressure distributions on the airfoil shows that this lift augmentation seems related to a lower value of the pressure in the separated area rather than to a stall delay phenomenon.
The reduced model gives direct access to key parameters of the plant, such as the separation front positions.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com