Sentence examples for sensor width from inspiring English sources
These clusters arise because of a combination of the differences between the power spectral densities of daylight and those of blackbodies, finite spectral sensor width and the noisy sensor responses.
The purpose of this work is to show experimentally and with finite element model (FEM) simulations that such sensitive modes are strongly influenced by the sensor width, suggesting that the sensitive modes are torsional or buckling modes.
Table 2 The specifications of pixy camera Pixy camera specifications Field of view 46° vertical, 75° horizontal Processor NXP LPC4330, 204 MHz, dual core Focal length ( (f) ) 2.8 mm Image sensor Omnivision OV9715, 1/4", 1280 × 800 Sensor height ( left({S}_hright) ) 2.43 mm RAM 264 K bytes Sensor width ( left({S}_wright) ) 2.43 mm .
Apart from the illumination cone, the detection numerical aperture (determined by the sensor width and zSS) is another important factor that would affect the spatial resolution in our scheme.
In order to obtain a uniform thermal field distribution in the micro-gas sensor, the width of the marginal four strips of the heating electrode was designed to be 50 μm and the width of the central seven strips 25 μm.
The scanning probe was positioned next to the antenna (distance 2 mm) with its 45 degree angled sensor head (width 2 mm) perpendicular to the direction of sound propagation.
b Measurement results of two Pd sensors with width configurations of 800 80 and 500 80 nm.
The released electrons return to the surface of the ZnO sensor, increasing the width of the depletion layers on the inner and outer surfaces of ZnO; the width of the conduction channel will increase to D3, which is larger than D1.
The dashed blue lines indicate the method of calculating ΔS for a Pd sensor with a width configuration of 310 and 80 nm. Figure 2b shows the measurement results of two Pd sensors with width configurations of 800 80 and 500 80 nm.
In Fig. 2c, the dashed blue lines illustrate how the calculated ΔS is obtained for a dual-beam Pd sensor with a width configuration of 310 80 nm.
The volume of the sensor is 24.6 mm3 (width is 4 mm, height is 5.6 mm, depth is 1.1 mm), which is drastically reduced relative to a conventional sensor [[14]].
