Sentence examples for sensor table from inspiring English sources

Figure 8 shows the selected current sensor, Table 4 presents its specifications, and Table 5 presents its connectors with Arduino board.

We learned that in such a case the outcome will be the three columns in each of the sensor table i.e. SensorTable (timestamp, value, event count).

If we want to resolve this issue then we will end-up only with three columns in each of the sensor table i.e. SensorTable (timestamp, value, event count).

The regression slope of the comparisons remained constant over the sampling period for the three treatments, suggesting that the Q7.1 is a stable sensor (Table 3).

It was found that the average peak current was 12.5 μA, and the relative standard deviation (RSD) was 3.5%% which showed acceptable reproducibility of the proposed cholesterol sensor (Table 3).

According to the satisfaction survey, the waist was the least accepted location to wear a wearable sensor (Table  3).

In this mode, the sensor tables for the SV, threshold, and energy coincidence are dumped instead of the count data.

The sensor tables for the SV step and m/q are dumped instead of the count data.

Finally, the characteristics of the developed sensor were compared with those of the previously reported ammonium-selective electrodes and/or sensors (Table 2).

These are designated as DataHawk (DH) sensors (Table 2), whose inputs, along with GPS and the pitot tube data, were used for UAV operation and flight control.

By conducting Monte Carlo cross validations (CV), the RMSE of RF method decreases from 6.02 ± 0.10 m (predicted from Landsat data alone) to 5.06 ± 0.07 m when using all inputs from three satellite sensors (Table 1).