Sentence examples for segmented coating from inspiring English sources

The study shows that the segmented coating requires 7%to8%8% less combustion-side feed flow and 70% less combustion-catalyst to produce the required flow of hydrogen (29.80 mol/h) on the reforming-side to feed a 1 kW fuel-cell compared to the conventional continuous coating of the combustion-catalyst.

In this work, the thermally induced cracking behavior of a segmented coating has been investigated.

The geometry under consideration is a hollow cylinder with a segmented coating deposited onto its outer surface.

The thermally induced interfacial delamination problem of a segmented coating is investigated using finite element method (FEM).

This result confirms that a segmented coating exhibits much higher thermal shock resistance than an intact counterpart, if only the segmentation crack spacing is narrow enough.

The results confirm that a segmented coating has higher delamination resistance than an intact one under the same thermal transients, as the segmentation crack spacing is smaller than a critical value.

Recently researchers have demonstrated an ability to perform semantic segmentation of video at 12 frames-per-second on a resolution of 1024 × 1280 pixels.31 The model was trained to segment coating, water, rivet, wet or corroded surfaces of penstocks.

Returning to the domain of ship ballast tanks, another 'Faster-RCNN' based on VGG19 has been trained to segment Coating Breakdown and Corrosion (CBC) in natural colour images.29 The model detects four classes of defects: CBC on edges, CBC on welds, surface corrosion (termed 'hard rust') and pitting; example output from the model is presented in Fig. 6.

Many river-crossing shield tunnels have been built, resulting in numerous structural waterproofing measures including multichannel technology (consisting of segment automatic waterproofing, coating the segment with external waterproofing), joint waterproofing, grouting hole and bolt hole waterproofing, backfill grouting, and shield tail paste-filling waterproofing [47, 48].

The registered scans were then segmented with bone threshold set at 515 mgHA/cm and titanium coating at 1500 mgHA/cm.

We find that miss classification occurs around metal and resist-coated metal lines at the left side of the segmented image.