Sentence examples for section was calculated from inspiring English sources

Hydraulic conductivity (Kh) for each section was calculated from the particle size distributions.

The tensile force acting on the fastener section was calculated using an equation for rooftop wind pressure.

The reason was that the flow resistance force at the aneurysm neck section was calculated to be lower than the flow driving force.

The percentage of cells staining positive for apoptosis and NO in each section was calculated based on the number of viable cells on each section.

The stress and strain state in the material section was calculated; the material yield condition was modelled using the isotropic Von Mises criterion, while the Al flow stress was described by the physically based Bergström model.

Using a one-dimensional (1-D) heat transfer model developed in our laboratory, the heat transfer coefficient of the evaporator section was calculated and shown to decrease with increasing cooler temperature.

As shown in the figure, the reduction in cross section is calculated by subtracting the out-section (S2) from the in-section (S1) and then dividing by S1.

Using structural relations, the capacity of concrete section is calculated.

The quality of the refrigerant in the test section is calculated considering the temperature and pressure obtained from the experiment.

All features discussed in this section are calculated based on this enhanced speech signal.

As an example, the Lennard-Jones potential is used and the corresponding differential cross section is calculated and tabulated.