Sentence examples for section height from inspiring English sources

This concept enables to select other parameters as unknowns (bending element concrete class, section height, etc).

The composite UHPC joint sustained little or no damage, owing to its small section height and excellent crack resistance.

The modulus of elasticity, moment of inertia of the transverse section, height and linear density of the crop stem, and crop throughput are some of the crop parameters identified in the models.

Such things as the frozen shaft thickness and the excavated section height should be chosen to assure the rationality of the design and to avoid potential faults and accidents.

Different surrogates (sets of elements and ordinary macro-elements) used for equivalent modeling of large side openings are evaluated, since the reduced shear stiffness of superstructure sides has large influence on the hull girder stress distributions along the entire cross section height.

Following a description of the test setup the results show that although the primary functions of the post-tensioning is to reduce section height and increase bay length under gravity loading it will also provide a significant contribution to the lateral resistance of the structure.

FE models were developed for both major and minor axis buckling based on test results, and the verified FE modelling technique was used to investigate the effects of cross-section slenderness λp, section height-to-width ratio H/Band the ratio of flange thickness-to-web thickness tf/tw on column curves of welded I-sections.

A total of 48 aluminum square hollow sections with different boundary conditions, loading conditions, bearing lengths and section heights were tested.

In the southern section, heights of more than 2,000 feet (600 m) are rare, apart from Kinder Scout (2,088 feet [636 m]), part of the Peak District of Derbyshire.

For ultra-high performance fiber reinforced concrete (UHPFRC), the constitutive model tensile backbone varies with section heights for different flexural members, due to the size-dependent stress-crack opening relation used to derive it.

Beam section heights were the following: 609.6 mm (frame 1), 508 mm (frame 2 and 4) and 457.2 mm (frame 3).