Sentence examples for secondary flooding from inspiring English sources

The current industry procedures were followed in the core preparation and secondary flooding experiments.

However, secondary flooding of 0.4 pore volume of PIL followed by continuous seawater was the most feasible since limited quantity is needed to provide the ultimate recovery.

The secondary flooding cycle provided cumulative oil recovery of 51% OOIP, mostly obtained by the first four pore volumes of seawater injection.

CO2 WAG injection, continuous CO2, or water injection tests were then conducted after the establishments of connate water saturations in secondary flooding mode.

Synergy of water secondary flooding and polymer tertiary flooding at different water salinity levels proved the efficiency of hybrid low salinity polymer flooding process in Berea sandstone.

Unsteady state method was used to calculate the imbibition relative permeability curves of the secondary flooding portion of the experiments implementing Jhonson Bosler Numan (JBN) method.

Both the high and low-salinity secondary floods were conducted in the same core.

The area of the secondary flood plume was correlated with the Tully daily flow (Figure 13b).

The extent of the secondary flood plume on a weekly basis varied from 1,163 to 9,433 km2.

In the case of the intermediate flood, the CO2 can easily contact formation water as compared to a secondary flood.

The optimum WAG ratio in secondary floods was a function of the total CO2 slug size (Jackson et al. 1985).