Another characteristic of these graded GSK-3 knockout lines consistent with the effects of increasing BIO dose is an increase in secondary sphere diameter for the "intermediate" GSK-3β knockout line, but a decrease in secondary sphere diameter for the full DKO (supplementary material Fig. S2B).
Three influencing parameters are considered: secondary injection diameter, secondary injection angle and secondary injection numbers.
There are computed: minimal Weber number when the drop begins to flatten, degree of flattening, critical Weber number and secondary drops diameter.
This positive effect of Notch activation on proliferation potential of stem/progenitor cells also occurs in the mammospheres, as demonstrated by an increased size of the primary and secondary mammosphere diameter in the DSL-treated suspension cultures (mean ± standard error of the mean, 245 ± 11.5 μM versus 130 ± 3 μM; n = 69 and n = 89).
The mean secondary particle diameters of the silica particles measured by dynamic laser scatter analysis were 33, 79, 326, and 945 nm, respectively (data not shown).
Previously, we confirmed by means of dynamic laser scatter analysis that the mean secondary particle diameters of nSP70, mSP300, mSP1000, nSP70-C, and nSP70-N are 65, 322, 1,140, 70, and 72 nm, respectively [9].
The effects of average grain diameter, secondary phase volume fraction and nano-scale particle on the hardness of ceramic materials are investigated.
The study of the secondary distributions mean diameter seems to be in good agreement with the numerical predictions of Stone (Annu. Rev. Fluid Mech. 26 (1994) 65).
The alumina powder fabricated by this procedure was uniformly distributed and contains nano-sized secondary particles with diameter about 10 30 nm in which the average pore size is 3.2 nm induced large surface area, 240 m2401.
In the case of Prototype Fast Breeder Reactor PFBRR), which is at an advanced stage of construction at Kalpakkam, flow in the 800 mm diameter secondary main circuit is measured by means of a bypass flowmeter.
