Sentence examples for screw width from inspiring English sources

The screw pitch of the proposed screw rotor decreases, on the contrary, its screw width increases continuously from the suction side to the discharge side.

Use a drill bit smaller than the screw width.

Simulation results indicated that the order rank to determine the mechanical response was the plate thickness, plate width, screw diameter, and number of screws.

On rare occasions when a new screw length or width was needed, an engineer would consult a 300-page manual dating from 1936 that explains the relationships between certain heights and pitches of threads and the lengths and widths of the resulting screws.

Among the original four pedicle groups, 68 screws were accurately inserted into 194 thoracic pedicles in group 1 (0–1.0 mm inner thoracic pedicle width), 115 screws in 176 thoracic pedicles in group 2 (1.1 2.0 mm), 304 screws in 352 thoracic pedicles in group 3 (2.1 3.0 mm), and 339 screws in 376 thoracic pedicles in group 4 (≥3.0 mm).

We were not able to place additional screws due to the width of the proximal nail.

Two 1/8 inch nylon screws and hex nuts (width across flats: 0.180 inch; thickness: 0.070 inch; thread size: 2 56; Small Parts Inc; Miami Lakes, FL, Part Numbers: MN-0256-04B HNN-0256-M HNN-0256-M HNN-0256-Mto the solidifying dental cement along the midline such that each nut and the distal half of each screweres embedded insertedesintohile the head of the solidifyingudentalward (Figure 1B).

When under light or no preload each canoe ball interface can be adjusted over a range of 8 mm using a wedge mechanism, which, controlled by a separate screw actuator, changes the effective width of the V-groove.

Choose the drill bit by the diameter of the screw shank, which is the width of the screw inside the threads.

With the 2x6's cut to length and trimmed to width, glue and screw them together making sure you leave the right amount of space for the foot at the bottom and right amount at the top for the top rail.

The PEC value of the helical screw-tape inserts of different width varies between 1.58 and 2.35.