Sentence examples for screw to pass from inspiring English sources
Drill a hole through the standard, being careful to keep it in line with the drill chuck, large enough for a number 14 wood screw to pass through.
Drawers with faces applied as a separate piece will require screws to pass through 1 ¼" - 1 ½" of wood or substrate.
After modification of our treatment standards, in which the thread part of the superior ramus pubic screw has to pass the iliopubic eminence completely, no further loosening of the last screws was seen.
If additional ramus pubic screw fixations are performed, the retrograde inserted screws have to pass the iliopubic eminence to prevent an axial screw loosening.
All lag screws should be long enough to pass through the foot/rails and about 2-1/2" inthethe legs, just don't let go completely through.
The reason for the extra long screws is that they have to pass through the jamb and through a couple of inches of empty space before hitting the framing stud in the wall.
Use screws or brad nails only long enough to pass through the width of the 1x2 and about 3/4 of the way into the plywood or MDF.
The heat had told but by Chittagong England had allowed the brouhaha to pass and their heads were screwed back on.
A promising method for continuous wet granulation is to pass powdered solids and binder through a twin-screw extruder, usually, as in this case, with co-rotating screws.
The birdbrained rooster quite naturally screws it up, telling a cow, "Oink-a-doodle-doo," and urging her to pass it along.
