Sentence examples for screw rotates from inspiring English sources

In a screw pump, a helical screw rotor revolves in a fixed casing that is shaped so that cavities formed at the intake move toward the discharge as the screw rotates.

To set up, loosen the center screw, rotate the arms and then tighten.

The typical extruder consists of a sturdy screw rotating inside a closely fitting enclosure and a die through which the material exits.

The cross or vector product of two vectors a and b, written a × b, is the vector where n is a vector of unit length perpendicular to the plane of a and b and so directed that a right-handed screw rotated from a toward b will advance in the direction of n (see Figure 2).

The phenomenon is the same as the barrel held stationary and the screw rotating.

Twin screw extruders comprise a pair of parallel screws, rotating inside a barrel with an 8-shaped cross-section.

Extrusion is commonly defined as a thermomechanical process, in which materials are physically and chemically transformed due to thermal and mechanical stresses generated by the screws rotating and the barrels heated, and then formed and shaped by forcing it through a restriction, or die.

MoMo2's gait sequence is simpler than that of MoMo1 and is composed four steps: loosening the screws, rotating the body, tightening the screws, and translating the device.

Design characteristics of the TSM reactor are two intertwining and specially shaped screws, rotating in the same sense and cleaning each other as well as the internal reactor surfaces.

In this study, olefin block copolymer (OBC)/MWCNTs composites were prepared using co-rotating twin-screw extruder with high rotation speed and the influence of screw rotation speed on the dispersion, shortening of MWCNTs and the macro-properties of composites was systematically investigated.

Upon loading, the nonlocking screw potentially rotates and makes line or even point contact with the plate hole.