Sentence examples for screw consists from inspiring English sources

d Clinical situation after 5 months of traction (from Greco et al. [25], with kind permission of Journal of Clinical Orthodontics) Fig. 8 Uprighting of mesially inclined #37 with a modified Uprighter Jet. a Uprighter Screw consists of a molar band with a welded lingual button that allows crown rotation when a force is applied; a.036 in.

Each screw consists of four transport screw elements (TSE) and four reversed screw elements (RSE).

Specifically, the hip compression screw consisted of 75 mm lag screw and 5-6 hofeside side plate (depend on the patient's leg length) was assembled after the side plate was machined to 13 mm in width.

The twin-screw granulator (TSG) screws consist of transport and kneading element modules.

The parallel sliding screws consist of two screws with an integral sleeve which are inserted together: each sleeve is first screwed into and locked to the nail, and then the 7 mm screw is advanced into the femoral head under X-ray control.

Cook et al. [ 18] compared the pullout strengths in severely osteoporotic specimens of a conventional pedicle screw (6.5 mm diameter) augmented with PMMA with an unaugmented expansive screw that consisted on four finned expandable screws expanding along the distal two-thirds of the screw (OMEGA-21, 7 mm diameter and 8.5 mm distal expansion).

Screw conveyors consist of revolving shafts with continuous or broken spiral flighting that operates inside a casing.

Start with RM to gather momentum and make a screw spin, which consists of making two spins and returning to RM. Semi RM, half RM to complete the T-Step, which is a lateral movement making a "T" with your feet and then kicking.

Figure  7 shows the basic operating principle of twin-screw extruder, which consists of two co rotating intermeshing screws inside.

For a pedicle screw, the pullout test consists of applying a gradual axial force at a constant rate of displacement to a screw that has been inserted into either the pedicle of a vertebra or within a block of "synthetic bone," where the maximum force required before the screw loses its fixation within the spine is measured.

In this study, a specially designed screw extruder was developed, and it consists of a series of transport screws and reversed screws, which are different from the ones mentioned above (The details of the screws were described in section of Methods).