Sentence examples for scratch testing from inspiring English sources

The adhesion strength between the coatings and substrate was assessed through scratch testing.

The influence of different process parameters on the friction and wear behaviour was evaluated using modified scratch testing.

Delamination occurred in an IBAD (ion beam assisted deposition -produced deposition -producedcteDLCo further investigation by scratch testing.

The coating was produced by physical Vapor Deposition (PVD) technique and the adhesive properties of DLC coatings were analyzed under ambient conditions using nano Scratch testing.

Higher adhesive strength between thin films and thermally-sprayed coatings compared to the simple thin film/carbon steel system was found by scratch testing.

Both coatings were found to display greater adhesive strength than cohesive strength, so adhesion could not be measured by scratch testing.

Focused ion beam cross-sections were used to verify the failing interfaces and to inspect any deformation in the film and the substrate caused by scratch testing.

The samples were investigated using X-ray diffraction (XRD), transmittance electron microscopy (TEM), UV-VIS-NIR spectrophotometer and coatings scratch testing.

The characterization included: scratch testing, wear testing+optical profilometry, microhardness, optical microscopy and X-ray diffraction.

Nano-indentation and scratch testing of the treated surface were carried out using a nano-indenter.

Results of scratch testing on hybrid organic inorganic coatings on float glass are reported.