Sentence examples for scanning in the sample from inspiring English sources

The lateral scanning in the sample arm was performed by using a galvanometer beam steering (VM500, GSI Lumonics).

By axially translating the scan objective, a z-scan in the sample of 0 to 95 μm from the surface of the lens has previously been shown [ 20].

Area scans in the sample surface were performed in the range of 500 μm × 500 μm up to 500 μm × 650 μm with a step size of 15 μm horizontal and 10 μm vertical.

Active tumour remnants were not detectable in the arterial phase of the CT scan in the samples from patients in the post-treatment phase indicating that complete local control of tumour was achieved in all cases.

Acquiring all the A-Scans that make up an OCT volume may require a few seconds, depending on scan speed and the number of A-Scans in the sampling grid.

The signal from the photodetector was digitized by a high-speed 8 bit analog-to-digital converter at 1 GSPS (ATS9870; Alazar Technologies, Inc .. Different scan lenses in the sample arm were used to provide different transverse spot sizes and depths of focus.

Spectral scanning was performed in the sample areas where black tonality was clearly identified.

In our approach for sdLCS, the path length window Δℓ over which S is acquired results from a convolution of the reference mirror scanning window ΔℓR in the sample (ΔℓR = 2ΔR/n, with n the refractive index of the sample), with the path length window that is probed by the spectrograph ΔℓS.

The full three-dimensional stress depth-profile was determined by neutron diffraction (ND) in both the coatings and the substrates, while synchrotron radiation allowed a depth strain scan in the thinner sample.

Thus, larger samples can be imaging in a single exposure without need for scanning of the sample and detector in the new set-up.

According to a selected confocal configuration of the optical probe, with its focal plane set to in-depth scan the sample, the residual stress could be measured at various depths along the thickness of both coating and substrate.