The dimensions of the fabricated parts were strongly dependent on the manufacturing direction and scan spacing.
Among them Four parameters, namely laser fill power, outline laser power, scan spacing and part orientation, were identified as important.
More such objects, including some that may surpass Pluto in size, should pop up in the next few years as telescopes scan space beyond Neptune.
Moreover, sensitivity analysis results indicate that mechanical properties of sintered parts are highly influenced by scan speed and scan spacing variations than others.
The effects of SLS parameters such as laser power and scan spacing on the encapsulation efficiency of BSA in the scaffolds and in vitro BSA release were studied.
The scan speed ranged from 2.540 to 5.080 mm s−1, and scan spacing from 0.10 to 0.20 mm with layer thickness from 0.10 to 0.15 mm.
A two-factor interaction model showed that the laser power, scan speed, and the interaction between the scan speed and scan spacing have the major influence on the porosity development in the builds.
Due both, the beam probe size and the scan spacing, a single particle can interact with the electron beam several times, this diffraction patterns possess certain similarities but are not equal as depicted on Fig. 5.
Scan space-time analysis identified 3 spatiotemporal high-risk clusters.
In this study, the effective laser scan repetition rate is 1 MHz and the rotary speed of the micromotor is 400 Hz (24,000 rpm), so each frame contains 2,500 lines over the circumferential scanning range of 10 mm, corresponding to an axial scan spacing of ~4 μm at the surface of the imaging catheter.
