Sentence examples for sampling width from inspiring English sources

Cu-Kα 40 kV/100 mA, divergence slit: 1°, scattering slit: 1°, receiving slit: 0.3 mm, scan speed: 4.000°/min, sampling width: 0.02°.

Therefore, the input signal is that the GPS satellite signal is sampled by the 38.192 MHz sampling frequency and the 4 bit sampling width of 50 s, and the frequency of the original signal is 9.548 MHz.

The crystal structure was investigated via XRD (D/MAX-2500 D/MAX-2500o, Japan) using Cu Kα radiation (λ = 0.154 nm) and a sampling width of 0.02° with a scan speed of 4°/min.

Data was collected from 3 to 80 degrees with a sampling width of 0.01 inch and a scanning speed of 3 degree/min [ 29].

Different flame spread behaviors were observed depending on the sample width.

The calculated shear strength and stress decreased slightly with the sample width, but show very little change at larger samples.

In autoclaved tissue force per unit sample width correlated with lamellar elastin content (P≪0.001) but not total elastin content.

The lateral fuel diffusion rate decreased with the increase of sample width, streamwise location and flow velocity.

The fatigue behavior of silver films on polyethylene-terephthalate substrates is studied for various levels of film thickness, pre-stretch, sample width, and applied strain range.

A three dimensional downward flame spread model taking into account the effects of sample width, thickness, ambient pressure and sidewall is established.

When sidewalls are present, the average maximum flame temperature (Tmax) increases with the rise of sample width, and it is lower than that without sidewalls.