Your English writing platform
Discover LudwigSuggestions(2)
Exact(28)
After 1e5 samples, the maximum bias for simulating two transient cases can be limited at 10.7%, and 17.9% respectively.
Based on two seven-hour-measurements on the 2 k and 6 k ppm methane samples, the maximum absolute error is less than 5%.
Among the nitrided samples the maximum and minimum wear resistance was obtained at plasma gases containing higher and lower H2 fractions, respectively.
From the testing results on the samples, the maximum axial free swelling strain is about 1.2%, while the maximum axial confined swelling strain is around 0.1% with swelling stress less than 25 kPa.
At temperature of 650 °C, BF slag with particle sizes below 2 mm and biomass particle sizes below 0.075 mm were used as test samples, the maximum bio-oil yield reached 57.3%.
Because of its larger active surface area, more excellent conductivity and higher porosity than other samples, the maximum specific capacitance and energy density are obtained up to 286 F g−1 and 39.7 Wh kg−1, respectively, at a current density of 0.5 A g−1.
Similar(32)
For a specific resonance mode in water samples, the maxima with metallic supports correspond to smaller sample thickness only.
In high concentration sample, the maximum probe beam divergence angle can be increased by 50%.
For the sealed sample, the maximum increase in acid value was up to 6 mg KOH/g (Figure 1b,c).
For every sample, the maximum operating current of discharge is at 100 mA, because after it increases, the voltage drop exceeds 20%% of the maximum voltage.
The model aims to sample the maximum of variation and heterogeneity to understand how the phenomena can be seen with respect to different actor types.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com