Sentence examples for samples of composites from inspiring English sources

Evidence of regions with large concentration of MMT was obtained in the annealed samples of composites with solid-like rheological behavior.

In acoustic microscopy, V z) curves have been used to investigate the visco-elastic parameters of thin sliced samples of composites, animal tissue, etc., while in this work it is applied in characterizing the geometry of periodically corrugated structures.

Figures 6 and 7 show the material temperature distribution of 6 samples of composite desiccant material.

In this research paper, experiments have been conducted on six samples of composite desiccant materials.

The samples of composite materials with cross section of 7.2 × 3.4 mm2 (or 2.6 × 5.2 mm2) were placed in cavity of rectangular waveguide and completely fill its cross section.

FT-IR spectra of the samples of composite and the silica gel were recorded using an IR spectrometer with Fourier transformation (Thermo Nicolet Nexus FT-IR, USA).

Samples of composite disks with 2D woven fabric material were designed and fabricated for spinning test, and the mechanics analysis on the thin woven composite disk was carried out for the first time.

In the basic research, the shot samples of composite materials were subjected to the thorough metallographic analysis with the explanation of the mechanism of scrap formation while being shot.

All samples of composite desiccant materials got saturated at 0 30 h as shown in Figs. 4 and 5. Open image in new window Fig. 4 Variation of adsorption rate and humidity ratio with time for desiccant material for sample 1, 2 and 3 Open image in new window Fig. 5 Variation of adsorption rate and humidity ratio with time for composite desiccant material for sample 4, 5 and 6.

OL fabricated the samples of the composites filled with nanoplatelets.

Samples of epoxy composites filled with 0, 10, 20, 30 and 40 vol% of recycled copper were prepared, respectively.