Sentence examples for samples increased by from inspiring English sources

The mean microhardness of laser cladding samples increased by 5.17, 4.90 and 4.89 times, respectively.

In general, the wettability of the samples increased by increasing surface roughness.

During cold rolling process it was observed that the tensile strength and ductility of the samples increased by increasing the reduction content.

Using aggressive TMF testing conditions, the average life of the samples increased by 47% using the molten caustic immersion to remove the embedded grit particles.

The growth rate in height of samples increased by print speed until 50 mm/s, while the deposition rate of formulation was affected by print speed and flow level.

Compared to those of the bulk coarse-grained (CG) Co25Ni25Fe25Al7.5Cu17.5 HEA fabricated by arc-melting, the yield strength and Vickers hardness values of the bulk nc samples increased by 834.9% and 251.9%, respectively.

The toluene desorption rate of the modified sample increased by 8.81% compared with that of the original GAC.

The permeability of the sample increased by a factor of two mostly due to the dissolution of rock cements during brine injection.

In contrast, the contents of saturate and aromatic fractions of the oil sample increased by 6.69 % and 1.39 % after aquathermolysis.

Therefore, the samples fabricated in this particular geometry maintained constant values of the magnetic anisotropy field and coercivity of one individual Co bilayer, whereas the volume and magnetic moment of the final sample increased by increasing the number of trilayers.

Although the normalized yield of the commercial sample increased by 38% upon increasing the overall silver loading to 13 wt %, a considerably higher improvement must be possible on the basis of the observed heterogeneity.