Sentence examples for samples fabricated from from inspiring English sources

Tissue samples fabricated from a calcium alginate hydrogel embedded with chondrocytes were subjected to a dynamic tissue culture.

Applied to strained samples fabricated from these materials, the stress calibration allows a correlation of the birefringence with quantitative stress values within the materials.

In this chapter, some analytical models accompanied by experimental tests are presented to estimate the dynamical response and the loss of energy on samples fabricated from polysilicon with different geometrical configurations.

Both the neat bulk samples fabricated from the nano-scale β-MnO2 rods and commercial micron-scale β-MnO2 particles exhibited similar performance in permittivity, electromagnetic interference shielding and microwave absorption.

In future work, the hypothesis about the axial distribution of trapped fission gas will be extrapolated to the Loss-Of-Coolant Accident (LOCA) analysis as an attempt to explain the fission gas release observed in some samples fabricated from irradiated KKL fuel rods and tested in the OECD Halden Reactor Project's LOCA test program.

The compressive strength of the samples fabricated from nano-size powders reached 10.87 MPa, which was almost twice as high as those fabricated from commercial micro-size powders, and was comparable to the high-end value (2 10 MPa) of human cancellous bone.

Fig. 1 Examples of insights gained from samples fabricated by nanoimprint lithography including (I) devices demonstrating the mechanism behind memristive behavior in metal-oxide-metal devices showing a an AFM image of metal-oxide-metal devices, b a schematic of the device and its virgin I V curve and c the circuit model for the device and its switching behavior [26].

Multi-band luminescence including the UV NBE emission of ZnO and the blue NBE emission of ZnSe is observed from the samples fabricated by depositing ZnSe at 500°C on the hydrothermally grown ZnO NRs.

Fig. 5 Representative pictures of samples fabricated by electrospinning of PS solutions from BuOH/(LBPS and HBPS) solvent systems with different solvent ratios (1 1, 1 2, 1 3).

Figure 1 shows the representative pictures of samples fabricated by electrospinning 15 % PS solutions from different single solvent systems.

Fig. 1 Representative pictures of samples fabricated by electrospinning of 15 % PS solutions from different single solvent systems.