Sentence examples for sample with thermal from inspiring English sources

Evidence of the decrease of orientation in the sample with thermal treatment can be seen via the onset of mobility, both by DRS and DMA.

This trend is more obvious for the sample with thermal annealing (see Figure 3b).

(b) Sample with thermal annealing at 600°C for 30 min.

For more insulating concrete, 70 vol% aerogel was needed and AIM samples with thermal conductivity as low as ≈0.1 W/ mK) were cast.

In addition to the interfacial analysis, the band offsets of the AlN/Si samples with thermal treatment are also investigated based on the fact that the band alignment is one of the most fundamental physical properties for the application of semiconductor device.

We performed the PCR on 72 samples with thermal cycling conditions as follows: one 1-min cycle at 98°C, 30 cycles of 10 s at 98°C, 30 s at 68°C, and then 8 min 15 s at 72°C, one 10-min cycle at 72°C, and then storing PCR products at 4°C.

We performed the PCR on 72 samples with thermal cycling conditions as follows: one 1-min cycle at 98°C, 30 cycles of 10 s at 98°C, and then 8 min 15 s at 72°C, one 10-min cycle at 72°C, and then storing PCR products at 4°C.

To obtain NiO/MnO2 core-shell heterostructures, a carbon layer was first wrapped on the surface of NiO nanosheets to serve as a sacrificial reductant by dipping EMID onto the as-prepared sample followed with thermal annealing (air atmosphere, 450 °C, 100 min).

The determination of both properties is based on a comparison of the cooling rates of a pre-heated sample with unknown thermal properties with the cooling rates of reference standards with known thermal properties.

The aim was to reconstruct the defect shape in a test sample with known thermal properties.

Partial pyrolysis of poly(dimethyl siloxane), followed by oxidation, results in the formation of a microporous sample with increased thermal stability and enhanced chemical resistance while maintaining the mechanical strength and some flexibility of the samples.