Sentence examples for sample transmission from inspiring English sources

As sample transmission system (TS), TransnetBW has been chosen, one of the four German transmission systems.

A sample transmission image and subsequent reconstruction images are shown in Fig. 2.

Curves were normalized on sample transmission; scattering from buffer sample (water) was subtracted.

For each sample, the reference spectrum of transmission was measured with the pure solvent (deionised water), and was subtracted from each sample transmission spectrum.

A pure PE pellet of the same thickness was used for measuring a reference spectrum, by which the sample transmission spectrum T was normalized.

μli (E) can be determined in different configurations, either directly by measuring the sample transmission, or indirectly, e.g. by measuring XRF or electron yields, as a function of the energy of the incoming X-ray.

Therefore, stations must have a consensus on making the same decision after the first two sample transmissions.

For the purpose of confirming the lattice spacing and the morphologies of the obtained samples, transmission electron microscopy (TEM) was recorded using a FEI Tecnai G2 F20 S-TWIN field emission microscope apparatus with an acceleration voltage of 200 kV.

The transmission route among these Chinese males was found to be MSM (9 samples) and heterosexual (3 samples) transmission.

These reflection-mode findings are in contrast to previously reported trends in thin-sample transmission, where the phantoms exhibited greater polarization retention.

In general, tissues in thin-sample transmission geometry were seen to be more depolarizing than phantoms for both linear and circular polarization states, an effect tentatively attributed to dependent scattering mechanisms [ 21– 21].