Sentence examples for sample the thickness from inspiring English sources

For each sample, the thickness of each bilayer did not exceed the value of the exchange correlation length calculated for these Co bilayers.

The heat treatment for different amounts of time at high temperature was used as method to sample the thickness variation and change in electronic and semiconducting properties of the thermal oxide layers.

For the as-prepared sample, the thickness of the nanorod films was 3.6 μm, and the nanorods display high density; there is a little space between the adjacent nanorods especially for the bottom part of the arrays, which is well consistent with the result of Fig. 1a.

In comparison with the coarse-grained (CG) sample, the thickness of compound layer on the SMAT sample is about twice larger than the CG sample and the diffusion activation energy decreased from 231 kJ/mol to 165 kJ/mol for the sample after SMAT 20 min.

According to the Au/C ratio values for the M10 sample, the thickness showing a gold gradient concentration is thicker, around 80 nm.

In order to do this, we need to insure that we are isolating the object relative to the background so that the optical thickness corresponds to the object of interest and not some variation in the thickness of the coverslip, the shape of the reflective mirror under the sample, the thickness of the liquid layer, or alignment of the sample relative to the microscope.

For all samples, the thickness of Ge QDs and Si spacer was 5 ML and 15 nm, respectively.

In PRF clots prepared from the stored whole-blood samples, the thickness and cross-links of fibrin fibers were almost identical to those of freshly prepared PRF clots.

The refractive index of deposited films is approximately constant for two last samples when the thickness of samples is larger than 620 nm.

STED imaging is much faster than single-molecule imaging techniques; however, the speed of the imaging depends on the signal-to-noise ratio within the sample, the sample thickness, and the image size.

To examine the morphology of the samples and the thickness of graphene oxide flakes, atomic force microscopy was employed.