Sentence examples for sample print from inspiring English sources

Further optimization of this dot blot assay is necessary in terms of the sample print system, detection system and analysis system.

Packaged PX 100 Silver Shade monochromatic film, along with sample prints.

Random vibration fatigue tests for a sample printed circuit board (PCB) assembly were performed to assess the fatigue life of BGA and TSSOP solder joints.

However, the transmission electron micrograph of a type A sample printed in the paper shows particles separated much farther than this.

To minimize sample carry-over during the multi-sample print processes a five step distilled water rinsing (3 × 2.5 seconds and 2 × 5 s) of printing pins was used followed with 80% ethanol and air drying.

The cross sectional morphology of samples printed by using the free-hanging printing method were analyzed.

These bimodal blends lead to significant enhancements in the mechanical properties of samples printed in the transverse orientation.

For instance, the mechanical properties observed of samples printed orthogonal to the print bed (transverse) are significantly weaker than those printed parallel to the bed (longitudinal).

The compressive strength, toughness and tangent modulus of samples printed with a delay of 300 ms were observed to be higher than other samples.

With the addition of just 3 mol% of each LMW additive, increases in the maximum stress from 15%to100%0% are observed for samples printed in the transverse orientation.

Furthermore, the results of SEM and μCT analyses showed that samples printed with a delay of 300 ms have higher dimensional accuracy and are significantly closer to CAD software based designs with predefined 0.8 mm macro-pore and 0.6 mm strut size.