Sentence examples for sample is saturated from inspiring English sources

A neutral saturation index (SI = 0) means the water sample is saturated by minerals and in equilibrium with the solids.

Then, the core sample is saturated with distilled water.

FORCs are minor curves beginning at different reversal fields (H r ) and ending when the sample is saturated.

In a typical test, core sample was saturated with synthetic brine followed by oil until an immobile water saturation condition is achieved.

For sintered glass, (treated with octadecyltrichlorosilane to obtain an oil-wet surface), after the sample was saturated with water (nonwetting fluid), it was clearly possible to follow its appearance at the upper face of the core sample.

Then the sample was saturated by using deaired water.

Therefore, after 5 days of oven drying, the sample was saturated again for 10 days.

After cooling to 100 °C, the sample was saturated with 10 vol% NH3/Ar, and then the sample was purged with Ar for 1 h to eliminate physically absorbed NH3.

After pretreatment, the sample was saturated with 10%% NH3 balance He mixture (75 mL/min) at 80 °C for 1 h and subsequently flushed at 105 °C for 2 h to remove physisorbed ammonia.

After pretreatment, the sample was saturated with 10%% NH3/He at 80 °C for 30 min and subsequently flushed with He flow (50 mL min−1) at 100 °C for 1 h to remove physisorbed ammonia.

After pre-treatment, the sample was saturated by passing (50 mL/min) high purity anhydrous ammonia at 80 °C for 1 h and subsequently flushed with He flow (50 mL/min) at 150 °C for 1 h to remove the physisorbed ammonia.