Sentence examples for sample increased by from inspiring English sources

The toluene desorption rate of the modified sample increased by 8.81% compared with that of the original GAC.

The permeability of the sample increased by a factor of two mostly due to the dissolution of rock cements during brine injection.

Wear volumes were measured by using MAHR Perthometer and it was found that the wear volume of TiN-coated sample was less than the uncoated one by a factor of 4. The surface hardness values of samples were measured by using CSEM nanohardness tester and it was found that the surface hardness of TiN-coated sample increased by a factor of 7.7 compared to the uncoated one.

In contrast, the contents of saturate and aromatic fractions of the oil sample increased by 6.69 % and 1.39 % after aquathermolysis.

Therefore, the samples fabricated in this particular geometry maintained constant values of the magnetic anisotropy field and coercivity of one individual Co bilayer, whereas the volume and magnetic moment of the final sample increased by increasing the number of trilayers.

On the basis of the thermal conductivity meter (TCM), the thermal conductivity of the optimal sample increased by 23.8% compared to when there was no expanded graphite in the composites with a mass ratio of PEG to waste sawdust of 4 1.

In general, the wettability of the samples increased by increasing surface roughness.

The mean microhardness of laser cladding samples increased by 5.17, 4.90 and 4.89 times, respectively.

During cold rolling process it was observed that the tensile strength and ductility of the samples increased by increasing the reduction content.

The growth rate in height of samples increased by print speed until 50 mm/s, while the deposition rate of formulation was affected by print speed and flow level.

Using aggressive TMF testing conditions, the average life of the samples increased by 47% using the molten caustic immersion to remove the embedded grit particles.