Sentence examples for sample gas and from inspiring English sources

Flue Gas Analyzer (KM9106) was used to measure the inlet sample gas and the outlet gas properties.

In this technique a reagent such as methane (CH4) is mixed with the sample gas and subjected to electron bombardment.

In the experiments, nitrogen containing 10 ppm of acetone is adopted as the sample gas, and the flow rate is 0.96 L/min., the power supply frequency of the asymmetric square wave is 1 MHz, and the duty cycle is 30%.

Oxygen consumption was measured with standard mass-balance techniques [ 2, 3] using an oxygen and carbon dioxide analyzero, 2-m long Nafion drying tube with countercurrent dry gas flow (Drierite (CaSO4)) to remove water from sample gas, and mass flowmetersp for measuring nitrogen and carbon dioxide calibration flows using the N2-dilution/CO2-addition technique [ 4].

In this case, Rosetta's final job was to sample gases and dust from the comet's scanty atmosphere, and snap high-resolution images from just hundreds of feet above its surface.

Two piezoelectric micropumps (Bartels Microtechnik mp6) flowed sample gases and ambient air over the MSS chip near their maximum rate of 0.3 m L/s[3].

After auto scale normalisation, sensor responses (dR) are calculated by the following formula: dR = (Rs-R /R, wheRs-R /Rs the response to the sampled gas and R is the response to the baseline reading, the reference gas being the VOC-filtered ambient room air.

The key conditions for HR-ICP-MS analysis were as following: the plasma power was 1350 W, the flow rate of cool gas, aux gas and sample gas was 16.86, 0.99 and 1.123 L/min respectively.

A variety of metal foil samples (gold, silver and copper) were measured in different sample gas environments (N2 and H2O), and a front aperture diameter of 0.8 mm.

The sample stage was maintained at 37°C, and the sample gas environment was maintained exactly as in the culture incubator.

Sample gas 1.018 L/min.