Sentence examples for sample achieved from inspiring English sources
75.0% of our sample achieved a score which was equal or less than 50.0% of the maximum achievable score (Table 1).
The GCM-1.5 sample achieved the highest specific surface area of 1128 m2/g and the mesopore area was 699 m2/g.
The G-LDH sample achieved a specific capacitance of 479.2 F g−1 at 1 A g−1 and 341.2 F g−1 at 10 A g−1, which were much higher than those of the pure LDH sample fabricated by the gas-liquid interfacial method and the LDH/graphene sample synthesized by the conventional hydrothermal method.
The optimal sample achieved not only high specific capacitance (401.6 F g−1 in 0.5 M H2SO4 and 328.4 F g−1 in 6 M KOH aqueous electrolyte at a current density of 0.5 A g−1), but also showed excellent cycling performance, with 100%and∼91%1% retention over 10000 cycles at 5 A g−1 in the above mentioned electrolytes.
One hundred-cycle device stability test has been performed, and it is found that for sample elevated at 100 °C, the UV-activated sample achieved stability in the first cycle as compared to the sample without UV irradiation which needed about 10 cycles to achieve stability at the initial stage, whereas the sample tested at room temperature was able to stabilize with the aid of UV irradiation.
A total of 33%% of the sample achieved stabilization.
(ii) For εs = 92 (Stage II), the RT-HPT sample achieves plasticity by means of solid phase transformation, while nanometer-thick twins occur in the HT-HPT sample.
Among these, the Li7.2La3Zr1.8Gd0.2O12 (LLZG2O) sample achieves the highest room-temperature total conductivity of 2.3 × 10−4 S cm−1.
When the tip approach to the sample surface, the Fermi levels of the tip and the sample achieve a state of equilibrium.
The percent of the sample achieving the lowest and highest possible scores were calculated (floor and ceiling effects).
For each sample achieving >50% GIA at 2.5 mg/ml, total IgG GIA EC50 was calculated in terms of total IgG concentration in the well by linear interpolation.
