Sentence examples for salinity solution from inspiring English sources
Adsorption test indicates high Ammoeng 102 adsorption tendency with more adsorption for higher salinity solution.
The RED-treated high salinity solution has a lower salt concentration and serves as the feed solution for the RO unit to reduce the pump work.
Between the spreading low salinity solution and the zone ahead of the front and connate water saturation is the connate water bank.
In reality, the hydrodynamic diameters of polymers are greater in higher salinity solution due to the polymer unfolding, and thus the steric repulsive forces may be greater in higher salinity solutions [49].
In this hybrid process the RED unit harvests the energy in the form of electricity from the salinity gradient between a highly concentrated solution (e.g., seawater or concentrated brine) and a low salinity solution (e.g., biologically treated secondary effluent or impaired water).
Jerauld et al. (2006) indicated that ordinary Buckley Leverett (BL) solution consists of a shock front and a spreading wave, whereas low salinity solution consists of two fronts, one corresponding to the transition between low and high salinity and a another corresponding to the transition between high water saturation and connate at high salinity.
We used artificial sea water (ASW), 36,500 ppm total dissolved solids (TDS) for the high salinity solutions and diluted it to 1400 ppm TDS for the low salinity solutions.
However in high salinity solutions, the "spill over" EDL is diminished and the edge surfaces are more exposed.
Adhesion on the fresh, clean muscovite surface varies considerably and the CH3 tip records a 10 20% decrease in response to low salinity solutions.
In zero salinity solutions, the value of d H remains at approximately 200 nm throughout the first 60 minutes after mixing with ASW.
Essentially, the extended EDL for the negatively charged face surfaces can mask (or spill over on) the neutral or positive charge at edge surfaces in low salinity solutions.
