Sentence examples for saline sample from inspiring English sources
To validate the simulation method, experimental measurements of temperature increase were conducted using a solenoidal coil (diameter 3 mm), a saline sample (10 mM NaCl) and passive copper shielding wires (50 μm diameter).
The reason why a moving reaction boundary (MRB) can stack analyte in highly saline sample in capillary electrophoresis [C.X. Cao, Y.Z. He, M. Li, Y.T. Qian, S.L. Zhou, L. Yang, Q.S. Qu, Anal. Chem. 74 (2002 41677] is still unclear.
To preserve the vitrification of the saline sample, frozen grids were carefully transferred onto a cryoEM equipped with a cryo-holder.
Just before the experiment, each scapula was mounted in a saline sample chamber with Ultralene® (SPEX SamplePrep, Metuchen, NJ, USA) foil windows, as shown in Fig. 1(A).
A 10% duty cycle and 5 second collection time (25000 excitation gates) assured this reliability for our implementation given a priori optimization (Media 1) at a fixed 6 µM probe concentration over five repeated measurements performed in vitro with an aerated saline sample.
Finally, preanalytic factors that account for poor tonometric reproducibility, such as inadequate volume of saline in the tonometer, errors in timing the dwell time of the sample or in the technique used to aspirate the tonometered saline sample, mixing the sample with air from the tonometer dead space, and delays in specimen analysis, might be prevented [ 5].
Saline samples were analyzed at 37°C and corrected for temperature.
A method for preconcentration and determination of trace amounts of cadmium in high saline samples is described.
HCO3– is the dominant anion in the freshwater samples, whereas Na+ and Cl− are the dominant major ions in the saline samples.
The derivatisation of phloroglucinol by acidified nitrite has been investigated as a means through which the latter can be quantified within freshwater and saline samples.
Hydrogeochemical modelling was carried out for the most saline samples, assuming such mixing between freshwater and seawater followed by evaporation, and the results show a very good agreement between the measured and simulated values.
