Sentence examples for roughness figure from inspiring English sources

The thermal annealing leads to a significant increase of surface roughness (Figure 3, second column).

First, conventional TEM experiments reveal the absence of extended defects and insignificant roughness (Figure 2a).

The lower reflectance values in the experimentally measured reflectance spectra are attributed to some inherent roughness (Figure 5a) in the planar Si sample used for solar cell fabrication.

Increasing the weight percentages of MeSiOr EZ suspension to the PMHOS suspension would also increase the surface contact angle based on the mechanism of enhanced surface hydrophobicity and surface roughness (Figure 9a-e).

The rms roughness, Figure 2d, is found to increase linearly with Φ up to Φ = 1 × 1018 cm−2 and remains roughly constant (approximately 35 nm) for higher fluences.

Our SEM and AFM data showed that in pH 6.5 ATF, both HA and TiO2 developed some early signs of pitting corrosion formation and an increase in surface roughness (figure 2 to figure 5).

Although much progress has been made, it is still not easy to fabricate this mirror and satisfy the surface roughness and figure error requirements.

Indeed we see other extraneous peaks which are attributed to wall roughness in Figure 12a c, and in particular we also see that the extraneous peaks are stronger for the 10% wall roughness case.

Hence, on the basis of the interstrain differences in surface roughness in Figure 1, HTCD strains should have the highest net capacitance, followed by the LTCD and then by the NTCD strains.

From the mirror fabrication point of view, it is necessary to see the mirror design and the tolerance budget, especially with respect to the surface roughness and the figure errors.

The Au Pd coating on the oxides causes the surface roughness seen in Figure 5. Fractured and powdered nitride monoliths were directly mounted on stubs using carbon tape without any coating.