Sentence examples for roughly the depth of from inspiring English sources

Giant squids have been recorded at a depth of 2,600 feet, roughly the depth of an inverted Burj Khalifa, the world's tallest building in Dubai.

Cut the dowel into short lengths (roughly the depth of the holes you drilled), apply glue to the holes and to the dowels and insert them into the holes OR Tightlyy pack toothpicks that have been covered with water-resistant wood or epoxy glue into the old holes.

Roughly speaking, the depth of the groove that can be scratched is proportional to the magnitude of the tip stresses (in which tip is acting as a cutting tool) that is the tip force divided by the lateral (horizontal) cross-section area of the tip.

However, it is difficult to explain the observed increase in resistivity during March 2012 at a depth of 0.1 km; this depth roughly corresponds to the depth of low-temperature hot-spring waters in the site ASY area (Fig. 6).

Hence, the etching under the given condition creates cone-shaped nanopillars for the etch mask of nanosilver islands in the range of roughly 30 60 nm, the depth of which is in proportion to the size of nanosilver islands.

Add the altered soil back into the hole or pile it in a mound, until the remaining depth is roughly equal to the depth of the potting soil or root ball of the plant being transplanted.

Based on the misfit of travel times (within 0.1 s) and the uncertainty of the velocity model (0.5 km/s), we roughly estimated the error for the depth of the reflector to be less than 2.0 km.

Processing, characterization and microwave surface resistance of the RF surface penetration layer of superconductors: The surface resistance of a superconductor in microwave fields is determined by a highly complex surface layer of a few 100 nm thickness (roughly the penetration depth of the field), with oxides, grain boundaries, impurities, and defects present.

The depth of coverage roughly follows a normal distribution with significant low and high tails, and has very high sequence-specific local fluctuation.

The depth of nanopores was roughly in agreement with the thickness estimations obtained from depth profiling data and different chemical compositions that exist at different depths of even a thin anodic overlayer.

The first step of the inversion used genetic algorithms to estimate the depth of the reservoir and roughly model its deformation.