Sentence examples for rotational shaft from inspiring English sources

In this paper, VSG control is embedded with a virtual synchronous rotational shaft which provides the power calculation module with an instant and accurate frequency signal.

The approach considers floating wind turbines as a system of several structural components, e.g. blades, rotational shaft, nacelle, tower, mooring lines, columns, pontoons and braces.

The rotational shaft is connected to a Scotch yoke mechanism that is used for converting the rotational motion into linear vibrations of two piezoelectricity-levers through springs.

For example, most conventional musculoskeletal robots have a shaft in the knee joints with a fixed rotational axis; however, the human knee has no fixed rotational shaft and rolls with a shifting rotational center.

As add-on devices, they can be directly mounted on a rotational shaft, in order to intervene as early as possible in the transfer path between disturbance and the noise radiating surfaces.

By subtracting (3) from (4) based on the assumption that (dot{omega }_{s}) is equal to (dot{omega }_{g}), the rearrangement gives: T_{s} = T_{a} /n_{g} - (J_{t} - J_{s} )dot{omega }_{g} (5 where ((J_{t} - J_{s} )dot{omega }_{g}) represents the dynamic compensation torque T comp which is calculated according to the acceleration of rotational shaft.

In general, it means both better economics and quality of complex products, e.g. shaped rolls for rolling operations, cams and camshafts (non-ruled surfaces included), non-rotational shafts, airscrews, prostheses for total hip replacements, etc.

The mechanical power for an electric generator is usually obtained from a rotating shaft and is equal to the shaft torque multiplied by the rotational, or angular, velocity.

The approach has been applied in two case studies in which a rotational part (shaft) and a non-rotational part are designed through manufacturing features.

A characteristic of the machine is the use of a worm and gear system with a stepping motor installed in the center of the hub, and the rotational main shaft.

Observing that patients with SCFE must walk with an outward foot progression angle and externally rotate the leg in order to flex the hip, we have been performing a femoral shaft rotational osteotomy wherein we rotate the lower femur 45° inward, relative to the upper femur.