Sentence examples for rotation ratio from inspiring English sources
As for peak torque (PT), the left-to-right rotation ratio was 0.91 at 30°/s, 0.92 at 60°/s, and 0.94 at 120°/s, respectively.
Other parameters of our algorithm are approximation distance (ad), approximation period (ap), rotation period (rp), 90-degree rotation force threshold (c 90 ), 180-degree rotation ratio threshold (c180) and phase 1 maximum iteration count (ip1).
If the country is lucky enough to need fewer troops in the field over the next few years, improving rotation ratios will still help create a higher quality military force.
In this work, it is shown that by controlling the solid liquid interface shape and provoking changes in the pulling to rotation rate ratio, it is possible to obtain the desired engineered domain structure, overloading problems such as the high electric field necessary for LiNbO3 domain reversal and the domain widening of the electroded area taking place in photolithographic techniques.
Results are obtained for different orthotropy ratios, rotation speed, hub ratio, length to thickness ratio of the rotating composite beam and different boundary conditions.
Estimated rotation angle, ratio of stress drop to background deviatoric stress, fault strength and pore pressure ratio.
As the connection condition worsens, the rotation transmission ratio deteriorates, and the incidence of II/III modes increases.
At relatively large deviation angles (e.g., θ = 20°; see Fig. 13), the rotation transmission ratio tended to be small (Fig. 14).
The second one is that the kinetic parameters sensitivity of DMF with respect to torsional vibration control are obtained and the range of each kinetic parameter (i.e. rotation inertia ratio, torsional stiffness and damping) is derived further.
It is recognized that the plastic rotation, drift ratio and displacement ductility levels are associated with specific damage categories may vary considerably with the structural system and construction material.
Good meshing occurs when η → 1((Delta bar{omega }_{ap}) → 0); conversely, the meshing is completely ineffective when η → 0. Figure 14 shows the effect of the gear connecting condition on the rotation transmission ratio η.
