Sentence examples for roll coating from inspiring English sources

Under these rolling conditions, the roll coating microstructure comprised of an amorphous magnesium-rich oxide layer lying on an amorphous mixture of aluminum, magnesium, carbon and oxygen with amorphous iron and chromium-rich oxide particles embedded within it.

The method was used for in-line monitoring of the conversion in clear and pigmented coatings, which were applied to OPP foil by roll coating at line speeds up to 120 m min−1.

In-line monitoring of the conversion in pilot-scale was carried out on clear and pigmented coatings, which were applied to polymer foils or paper by roll coating.

A piece of PET film was stuck on glass board with scotch tape before roll coating.

Damage to the work roll surface and work roll debris observed within the roll coating highlighted that the work roll surface was involved in the roll coating formation.

Analysis of the roll coating suggested that the initial roll coating composition and microstructure were influenced by the work roll and work piece material composition.

The process was applied to the deposition of optical multilayer coating in a roll-to-roll coating system.

Open image in new window Figure 2 Schematic illustration of the pad-mangle process, indicating the dip coating and the forward two-roll coating parts.

The experiments were carried out in a roll-to-roll coating machine using a rotatable magnetron system.

The results indicate how a deformable cover can be used to delay the onset of ribbing in forward-roll coating.

From the 3-roll coating experiments with forward and reverse coating modes, the operability windows in the coating process, demarcating the uniform coating flow from defects, were established.