Sentence examples for rod nut from inspiring English sources

Do not force the truss rod nut.

If the neck needs more relief, you will turn the truss rod nut counterclockwise.

Install the strut bearing over the spring and replace the strut rod nut to the manufacture specified torque.

If the neck needs less relief, you will tighten the truss rod by turning the truss rod nut clockwise.

Single use of wires with reuse of other components (rings, rods nuts and bolts), either through recycling or sourced locally in Pakistan, was envisaged (Fig. 1a, b).

Most of the research in this area is concerned with modified versions of welded shear studs or various threaded rod and nut configurations and refers to only one type of shear connector.

Open image in new window Fig. 3 CDS implanted into the femur (anteroposterior view): The traction wire is connected to the fully inserted mechanics Open image in new window Fig. 4 Threaded rod and spindle nut: a spindle nut and screws for 6-mm bone segments (screws can also be applied to smaller spindle nut).

As for locally sourced components, we established that roofing rods and nuts are the same size as the conventional Ilizarov equipment; these components are made of stainless steel [ST37-Din 1652 quality steel to mechanical property 4.6 grade to DIN.EN 20891-1, hot spelter galvanised to BS.1461- 1999) 45.5 HT and bright zinc plated to DIN.ISO.4042.AZK (BS.33202 Part 2)].

There are three different components enabling a maximum distraction distance of 216 mm for the femoral version of the nail: Open image in new window Fig. 1 Schematic of CDS implanted into the femur: 1 traction wire fixed to the tibial tubercle, 2 nail, 3 mechanics, 4 threaded rod, 5 spindle nut and connection to bone segment, 6 callus 1.

We used a colored plastic binder cover for a pickguard, white colored pencil to do the inlays (adding light pink and blue highlights gives it a pearly shine), tiny plastic boxes for the pickups, a piece of the old pickguard for the rod cover, and nuts for the knobs.

Just install the nuts back at the proper torque on the ball joints, tie rod ends, and wheel lug nuts.