Sentence examples for rf shielding from inspiring English sources

Among subjects reporting the installation of RF shielding on windows or other locations within the home (n = 29), residential RF power densities were attenuated an average of 64% compared with 39% among those without RF shielding (n = 225, p = 0.05).

In this study, an overall 44% reduction in RF levels from outside to inside homes was observed, and installation of RF shielding within the home decreased RF power densities by an additional 45%.

In this study, the MR-compatible digital camera was a commercially available USB2 device (Quickcam pro 9000, Logitech, set to resolution 640 × 480 pixels, 30 fps) that had been made MR-compatible via the removal of any magnetic parts and the addition of RF shielding.

Also shown are the important criteria for the design of effective RF shielding vessels for improving the electromagnetic environment.

Both chambers provide a radiofrequency (RF) shielding (at least −60 dB) against and toward outside, so the electrosmog is shielded and does not interfere with the inner environment.

The special vacuum components, such as photon absorbers, RF shielding bellows, and the in-vacuum wiggler, have been manufactured according to the characteristics of the BEPCII storage ring and shown to perform well.

The temperature was measured using a Chromel Alumel type K thermometer mounted on a removable substrate table and RF shielded via a braided stainless steel sheath.

This coil is characterized by major advantages: (i) completely distributed coil circuit, (ii) high-quality factor (Q), (iii) simple coil structure, and (iv) better sensitivity and less signal-intensity variation in the MR image of the human head compared with an RF shielded birdcage coil of similar coil size.

The measurement system consists of the N210/DBSRX2 receiver combination inside of an RF shielded enclosure.

HFI has three degrees-of-freedom (DOF), uses electromagnetic motors to enable high-fidelity haptic rendering (>350Hz), integrates radio frequency (RF) shields to prevent electromagnetic interference with fMRI (temporal SNR >100), and is kinematically designed to minimize currents induced by the MRI scanner's magnetic field during motor displacement (<2cm).

Micelles formed by Rf-PEGs in water consist of a hydrophobic fluorocarbon core (Rf core) shielded by a large hydrophilic poly ethylene glycol) shell (PEG shell).