Sentence examples for reverse bend from inspiring English sources

In this paper, the parameters which affect the strength of the reverse bend joints are found out by conducting experiments on different specimens.

For most of the adherends used in the automotive industries it has been found that a 10 degree preformed reverse bend joint consistently showed a 15percentt improvement in the strength compared to the traditional lap-shear joint.

One of advantages of the proposed lattice is that a very small, even negative, momentum compaction factor is easily achieved by properly choosing the bend-angle ratio of the reverse bend to the main bend.

The first magnet of the reverse bend pair, which are both H style magnets, designated the GX, is skewed in shape with full and half coil excitation to act as a switch between the IR and UV beam lines.

The second magnet of the reverse bend pair, designated GQ requires a wider "good field" region than the other two magnets, resulting in a complicated pole tip shape as well.

Ciliary motility is caused by the relative sliding of the nine outer axonemal doublets, operating as two opposing sets, one (doublets 1 4) to produce the effective stroke (or principal bend in flagella), one (doublets 6 9) to produce the recovery stroke (or reverse bend), powered by ATP and a set of molecular motors, the axonemal dyneins.

Reverse bending SN curves were determined for both notched and unnotched conditions.

The CEA benchmark is fatigue and creep fatigue evaluation of welded plates under reverse bending at 550 °C.

The cyclotrons use reverse bending, for orbit length adjustments, and harmonic number jumps to achieve a synchronous acceleration.

The effect of different shot peening treatments on the reverse bending fatigue behaviour of Al-7075-T651 wastudieded.

The hose of the oxygen lancing equipment in LD shop # 2 has failed at the weld bellows interface by reverse bending fatigue.