Sentence examples for reveal optimum from inspiring English sources

The qualitative simulation results reveal optimum working areas in which usage-cost reduction efficiency of the method is significant and extra signalling is minimum.

The analysis result revealed optimum step size of humanoid robot to perform biped walk in various directions.

EBSD is used to analyze the microstructure evolution and void formation during superplastic deformation, revealing optimum microstructural and forming conditions for superplasticity of Mn Si Cr C steels.

Surface and contour plots of the regression models revealed optimum H2 production rate of 6.885 mL H2 L−1 h−1 showing correlation with experimental optimum H2 production rate of 7.0 mL H2 L−1 H21.

Validation tests revealed optimum performance at 0.1 M Cyanex 272 and 0.05 M TOPO, 4 M HNO3 as the stripping solution and flow rates of both feed and stripping solutions were 100 mL/min.

The selectivity of the fabricated sensors was further investigated by testing different metal ions, and it revealed optimum response to Hg2+ among other metal ions, which makes them preferable for practical applications.

The result of the optimization of cultural conditions of the bacterial co-culture revealed optimum cellulase production at the following conditions: temperature, 40 °C; pH, 7; substrate concentration, 4.0 % (w/v); inoculum concentration, 4%% (v/v) and when yeast extract was used as nitrogen source.

Surface and contour plots of the regression models revealed optimum H2 production rate of 7.97 mL H2 L−1 h−1 at 32 °C with 2.012 g L−1 DL malic acid and 0.297 g L−1 L glutamic acid, which showed an excellent correlation (99.36%) with experimental H2 production rate of 7.92 mL H2 L−1 H21.

Independently varied parameters for single HV and LV pulses or combined HV/LV pulses revealed optimum transfection for 3T3L1 cells or primary murine preadipocytes with an initial HV pulse of 3 kV/cm for 400 µs followed without a gap by a LV pulse of 1.5 kV/cm for 5 ms. Cell viability and transfection efficiency were compared with nucleofection as an established electroporation method.

Studies also revealed optimum birth interval can improve the health status of children.

Structural studies reveal an optimum duty cycle of 33% to deposit well-crystallized Cu2O film.