Sentence examples for resulting mold from inspiring English sources

Once in possession of the kit, users simply design their article in CAD or Illustrator and place the resulting mold into the Electroloom Alpha Chamber.

The resulting mold is developed in SU-8 developer for 2 min at room temperature, rinsed with isopropyl alcohol, and hard-baked at 125 °C for 15 min. PDMS, mixed at a ratio of 1 10 curing agent to prepolymer, was poured over the negative mold, degassed, and allowed to cure between 2 and 16 h at 70 °C.

The resulting negative mold was then used to cast secondly PDMS replicas.

Now the National Trust for Historic Preservation has begun to raise money to preserve the Brick House, which was completed in 1949 and has been closed to the public since 2008 because of problems that include leaks resulting in mold on silk wall coverings, furniture and books.

That we should have said: 'Oh, you had a water leak a year ago and that leak might result in mold.

"But you can't do that in, say, Minnesota; if it's cold outside, you end up with condensation all over the walls and closets, which results in mold growth".

Since leaks will cause moisture to accumulate, they may result in mold.

The silicon wafer was replicated by mixing PDMS in a 10 1 ratio, degassing, pouring the liquid PDMS onto the silicon mold and curing at 75 °C for 12 h, resulting in PDMS mold (I), which was subsequently silanized.

With each projector simultaneously showing a unique perspective of the same object, the result molds an image from clouds of condensation, disregarding the flat two-dimensionality of other fog displays.

"Children with asthma should not be exposed to mold," added Maureen Lichtveld, who is currently studying the link between mold resulting from Hurricane Katrina's floodwaters and childhood asthma.

Our results show that the film causes a higher contact temperature between the hot melt and mold during the molding process, resulting in asymmetric temperature in the mold (core and cavity), increasing the crystallinity of the cavity and consequently increasing product warpage.