Sentence examples for response of the reflection from inspiring English sources

denote the impulse response of the reflection channel for the kth (k=1,2,⋯,K) transmitted pulse of Radar-1, which returns the pulse to its source.

Here, for n=2,3,⋯,N, g n,1 is the impulse response of the reflection channel between the interfering Radar-n and the main Radar-1.

Additionally, the impulse response of the reflecting system, or equivalently its reflection coefficient, can also be determined.

Specifically, we design a set of three functions, which are then adopted as the amplitudes of the impulse responses of the three reflection channels.

They are the non-flat response of the loudspeaker and the reflection at the pipe exit.

The diffusion coefficient measures the similarity between the polar response of a Lambertian reflection and the actual one.

Useful information on this coupling may be obtained by measuring the reflection response of the flame to incident acoustic perturbations.

The design is obtained by adjusting the geometrical parameters after analyzing the reflection response of the proposed grating structure with various fill factor f, groove depth d and period p for the normal incidence TE-polarized light based on rigorous couple-wave analysis method.

We assume that the antenna system is embedded in DI water with a refractive index of nwater = 1.33. Figure 1c shows the reflection response of the bowtie antenna with gap, G = 50 nm, height, H = 200 nm, length, L = 250 nm and the tip angle, θ = 90o (the device parameters are depicted in Fig. 1c inset).

This response occurs before the reflection of waves from the boundaries and cannot be modeled by large mass drop weight tests.

where h(0)(t E,R) represents the line-of-sight (LOS) impulse response, and h k)(t E,R) is the impulse response of the light undergoing k reflections, i.e. the multiple-bounce impulse responses.