Sentence examples for response for the system from inspiring English sources

The short-term (local) dynamic response for the system are almost identical for all the three models.

The Q matrix of the LQR design is then finely adjusted in order to assure the desired transient response for the system.

This section focuses on testing the derived model to obtain its response and to manage to control it by implementing and comparing between different control strategies for the purpose of obtaining a satisfactory response for the system.

The parameters for analysis correspond to the response of the system for electricity generation.

The linearized impact models proposed can be used to well describe the small-deflection responses for the system, based on 1-D wave propagations or the dependence of quasi-static band deflection on time if the impact duration is much longer than the double wave transit time for the band.

To study this, the ratio, R t, (which is between the peak response of controlled asymmetric and corresponding symmetric system) is obtained for lateral and edge displacement as well as acceleration responses for the system with T y  = 1 s and ( Omega _{uptheta} ) = 0.5, 1 and 2 and plotted against e x /r in Figs. 12, 13 and 14, respectively.

This means that, for a given initial state of the system, and for the several failure modes considered, it is necessary to estimate the probability of the load events and the conditional probability of response of the system for a given load event, as well as estimating the consequences on the environment for the obtained response of the system.

The user can design required number of rules as per the system memory and time constraints for better response of the system.

In figure 7K we show the effects of strain rate on the response of the system for a fixed strain amplitude.

Experimental response of the system, tuned for the 1 4 internal resonance condition, are performed for random and harmonic excitations.

In fact, reducing the number of dampers for the dynamic response of the system can contribute more than increasing the number of dampers.