Sentence examples for respective diameters from inspiring English sources

The SAXS-measured nanoparticle diameters were slightly larger than the respective diameters measured by TEM.

As found from XRD, both anatase and rutile crystallites increase their respective diameters from d A = 20 nm, d R = 16 nm (before annealing) to d A = 37 nm, d R = 57 nm (after annealing).

Sections of pipeline in waters 200 m or deeper were identified and buffered to represent their respective diameters.

b Average numbers of basal bulbils (white circles) and flowers (black) per plant in the respective diameter classes.

The mean SD of each diameter or area was plotted according to the respective diameter or area of the tumours in lung and liver.

After acquisition the Q abs of the HE11 mode, the FWHM of respective diameter of NWs can be found out, and therefore, the optimal diameter for maximal light harvesting is determined.

The morphology of the as-spun and calcined MgFe2O4/PVP composite nanofibers was revealed by SEM. Figure 3 shows the SEM micrographs and the respective diameter histogram of the as-spun MgFe2O4/PVP composite nanofibers.

The two membrane-templates had a diameter of 25 mm and thickness of 13 μm, and respective pore diameters of 0.4 and 1 μm.

Permeation measurements were performed at 20 °C for helium (He), oxygen (O2), and carbon dioxide (CO2) with respective kinetic diameters of 2.65, 2.92, and 3.23 Ǻ, respectively [30].

The resulting nanodot arrays have respective dot diameters (D) and inter-dot distances (Dint) of approximately 40 and approximately 67 nm (Figure 1d), approximately 70 and approximately 115 nm (Figure 1e), and approximately 140 and approximately 160 nm (Figure 1f).

However, its precision can be significantly reduced beyond the selected range of factors or by changes that cannot be involved in the regression (change of material wear character, etc).. Statistical processing of the measured data yields interesting relations between certain factors (abrasive mass flow rate, pressure) and respective results (diameters of holes, cylindricity).