Sentence examples for resolution of collisions from inspiring English sources

A central problem in wireless packet networks is the efficient resolution of collisions among nodes with independent transmission schedules.

The genesis of the PAIRS approach in [1] was the need for a non-stiff method to keep rigid bodies apart, i.e. resolution of collisions.

To introduce this method, I first apply it to the fast (relative to the time-step) resolution of collisions between rigid bodies.

In the case of fast dynamics (relative to the time-step), such as the longitudinal extension of biological filaments or the resolution of collisions, the PAIRS method is essentially enforcing a rigid constraint (e.g. no filament elongation, no impingement of rigid bodies) in a pairwise manner.

It is also found that resolution of the particulate collisions close to the target surface plays an important role in characterizing the trends in the deposit pattern.

Here, the collision resolution of the algorithm used in the practical session is based on open addressing.

When control in CAPS is given to EDCA, the modified CAPS algorithm will give absolute priority to partition A packets in internal collision resolution of EDCA [3].

As the load increases, higher R can provide larger throughput gains, delay reductions, and energy consumption savings, due to the effective capability for packet collision resolution of FF-NDMA.

For all dependent scan events (MSn) a resolution of 15000 and normalized collision energy 35% was used.

Mass analysis was carried out on an LTQ Orbitrap Velos Thermo Fisher Scientificc, San Jose, CA) with data-dependent analysis mode, where MS1 scanned full MS mass range from m/z 300 to 2000 at 30,000 mass resolution and six HCD MS2 scans were sequentially carried out at resolution of 7500 with 45%% collision energy, both in the Orbitrap.

If no other forces than F are acting on the two spheres in Fig. 1A, then this method of collision resolution is stable at any time-step.