Sentence examples for resistive coating from inspiring English sources

Modified expandable graphite (MEG, expandable graphite modified by polyethylene glycol) was used as modifier to improve the fire protection of intumescent fire resistive coating.

The combination of epoxy emulsion and self-crosslinked silicone acrylate (SSA) emulsion was used as mixed binder for preparing water-borne intumescent fire resistive coating.

A first attempt in this direction has been successful, and we have found a way to produce glass with appropriate resistive coating by using industrial automatic silk screen printing techniques with an ad hoc developed synthetic varnish.

Epoxy emulsions with different number average molecular weight (¯¯¯¯Mn = 446, 568, 1025 and 1739 g/mol) were used as polymer binders for preparation of waterborne intumescent fire resistive coating.

In order to reduce these side effects, the inner wall of a hollow cylindrical tube is generally coated with a resistive material, for example, a steel pipe coated with a chrome layer.

Most of fabric-based sensors were fabricated by either coating piezo-resistive materials on a fabric or directly knitting conductive fibers into fabrics.

Evidently, the above results confirm that the device unit of trilayer structure of Al2O3/HfO2/Al2O3 on TiN-coated Si exhibits excellent resistive switching performances, such as stability of resistance ratio of on/off states, uniformity of set and reset voltages, and reliability and durability of switching between the LRS and the HRS.

These experiments aimed to investigate transient stability and AC losses of CICC conductor coated with different resistive barriers (Pb 30Sn 2Sb or Ni plating on strands) and to check the design of PF and TF CICC for HT-7U magnets.

The divider, which distributes high voltage applied to the photocathode to the two micro-channel plates (MCPs) that constitute the amplification stage, is comprised of the two MCPs and three glass mechanical spacers, each of which is coated with a resistive layer using atomic layer deposition (ALD).

This research thus demonstrated a new composite coating with better wear resistive performance compared to a coating deposited by commercially available stainless steel powder.

In order to further understand the underlying resistive switching mechanism of HfO2/TiO2/HfO2 on Pt-coated and TiN-coated Si, we performed the XPS narrow scans and depth analyses on trilayer structures with symmetric and asymmetric bottom/top electrodes.