Sentence examples for resist structures from inspiring English sources

The 3D pattern of resist structures is subsequently transferred into SiO2 by an appropriate etching.

The 3D pattern of resist structures is subsequently transferred into SiO2 by appropriate etching.

Ion projection lithography (IPL) is designed to realize resist structures on the wafer plane well below 100 nm.

Nanoscale gratings are patterned in ZEP520A resist using EB lithography, and the resist structures act as a mask for FAB etching of GaN (steps a-b).

Fluid dampers operate on the principle of fluid flow through orifices and provide forces that always resist structure motion during a seismic event.

Based on the binary nature of the lithography process, this technology demonstrates much higher process latitude and a possibility of resist structure formation with 20 40 different heights in a relatively thick resist layer.

The last defect that was observed in the fabricated NHAs through a single liftoff process was the collapse of the resist pillars (region 3 in Fig. 2a) which was due to the capillary force (during rinse solution drying after development) and high aspect ratio of resist structure.

A simplification can therefore be achieved if an already produced slope structure with a homogeneous Mw is generated, e.g. by using an imprinted thermoplastic resist structure such as PMMA which is flood exposed with a dose D > D1 over all steps.

Besides the conventional approach based on the three-layer resist structure a new one based on the poly Si/polyimide bilayer is demonstrated using which a ratio of the gate head length to the gate foot length larger than 10 is achieved.

Since many eukaryotic proteins with repetitive sequence elements resist structure determination by X-ray crystallography, our study might offer a useful approach to advance such difficult cases.

Therefore, the main way of decreasing losses is to construct seismic resisting structures.